An Introduction to Assessment Validation: Validating Assessments Explained

An Introduction to Assessment Validation: Validating Assessments Explained

Blog Article

RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.

Although we have published several articles on validation, let’s revisit the term. ASQA describes validation as a quality review of the assessment process.

Validation involves checking which aspects of an RTO's assessment process are accurate and identifying areas for improvement. With a solid understanding of its components, validation is less intimidating.

According to Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and are conducted according to the Principles of Assessment and Rules of Evidence.

The standards mandate two types of validation.

The first kind of assessment validation ensures your RTO's assessment adheres to the training package requirements within your scope.

The next type of validation confirms assessments are carried out following the principles of assessment and rules of evidence.

Thus, validation is performed both prior to and following the assessment. The first type, assessment tool validation, is the focus here.

A Look at the Two Types of Assessment Validation

Assessment Validation: What It Is

As discussed earlier and in our prior blogs, validation involves two parts: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.

On the other hand, post-assessment validation deals with implementation, ensuring Registered Training Organisations follow the Principles of Assessment and Rules of Evidence.

We will dedicate this article to assessment tool validation.

The Process of Assessment Tool Validation

With a grasp of the two validation types, let’s focus on assessment tool validation.

When Should You Conduct Assessment Tool Validation?

Assessment tool validation is intended to confirm that all elements, performance criteria, and performance and knowledge evidence are met by your assessment tools.

This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.

You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.

Nevertheless, this isn't the only occasion for this type of validation. Conduct assessment tool validation when you:

- resources are updated
- when new training products are added on scope
- you review your course against training product updates
- your learning resources get identified as a risk during your risk assessment

ASQA applies a risk-based approach to regulate RTOs, expecting regular risk assessments. Hence, student complaints about learning resources are a good opportunity for assessment tool validation.

Which Training Products to Validate?

Keep in mind, this validation ensures compliance of all learning resources before use. All RTOs must validate resources for each unit.

What You Need for Assessment Tool Validation

Teaching Materials

For validation of your assessment tools, you will require the full set of your learning resources:

Mapping tool – the primary document to check. It reveals which assessment items align with unit requirements, expediting validation.

Learner/student workbook – ensure it's appropriate as an assessment tool. Check if the instructions are clear and answer fields are adequate. This is a frequent issue.

Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item exist. Clear benchmarks are essential for reliable assessment outcomes.

Other related resources – may consist of checklists, registers, and templates created separately from the workbook and marking guide. Validate them to ensure they are appropriate for the assessment task and address unit requirements.

Validation Board

Clause 1.11 describes the requirements for validation panel members, indicating that validation can be performed by one or more persons. RTOs often require all trainers and assessors to attend, and sometimes industry experts are invited.

The members of your validation panel must collectively have:

Relevant vocational competencies and industry skills for the unit being validated

Up-to-date knowledge and skills related to vocational teaching and learning

Any of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or the equivalent successor

Validation tool/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool helps in both the validation process and documentation. It makes it simpler to see how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it serves more info as documented proof that you have validated your resources before student use.

ASQA does not specify a recommended or required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools in their entirety to ensure they meet the principles of assessment.

Assessment Principles Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.

We strongly suggest using a more detailed template to evaluate each unit requirement and its corresponding assessment items. Here is an example:

Element Performance Criteria Instructions for Assessment Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Needs Review?

As stated in our blog post Common Problems In Assessment Tools, you must ensure your assessment tools allow trainers to adhere to assessment principles and evidence rules.

Basic Principles of Assessment
Fairness – Is equal opportunity and access provided to everyone in the assessment process?

Flexibility – Are different options available in the assessment to demonstrate competence based on individual needs and preferences?

Validity – Does the assessment test what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment produce the same results every time, regardless of who conducts the training? Will different assessors consistently decide on skill competence?

Evidence Basic Rules

Validity – Does the evidence indicate that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to ensure the learner has the required skills and knowledge?

Authenticity – Is the assessment tool confirming that the work is the candidate’s own?

Currency – Do the assessment tools mirror current units of competency and modern industry practices?

Although these are frequently covered in VET professional development and nationally recognised training, many tools still struggle to meet these requirements.

To avoid using learning resources that do not address all unit requirements, ensure you follow these guidelines:

Show What You Mean

Observe the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Carry out each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication in accordance with service and regulatory requirements:

diaper change

prepare bottles, bottle feed infants, and clean equipment

prepare solid food and feed infants

respond to infant signs and cues appropriately

prepare infants for sleep and settle them

monitor and support age-appropriate physical exploration and gross motor skills

Having students describe changing nappies for babies under 12 months doesn’t directly fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby is not sufficient.

Total or Not Competent

Mind the lists. In the previous example, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Add More Specificity

Every assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on student competence. Thus, make sure your instructions are not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What details can be included in a work package?

Possible answers may include:

Obligatory resources

Relevant expenses

Activity length

Assigned functions and responsibilities

When an assessment item requires multiple answers, indicate the number of answers needed from a student. This way, your assessment is reliable, and the evidence collected is valid.

This applies equally to assessment items with double-barrelled questions or questions that require more than one answer at the same time. These can confuse students and assessors, as illustrated in the example below:

Identify a hazard and/or environmental issue in the work area and select the most effective hazard control hierarchy.

Answers might include, but are not limited to:

Weather conditions – isolation of work area, engineering controls, personal protective equipment

Work area and ground conditions – elimination, isolation, use of engineering controls

People – isolation, engineering, administration

Structural hazards – substituting, isolation, engineering controls

Chemical hazards – isolating, engineering controls, administration

Equipment or machinery – isolation, use of engineering controls, administrative controls

Avoiding double-barrelled questions makes it simpler for students to respond and for assessors to accurately judge competence.

Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” But such guarantees mean you must wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s wiser to take the safe and compliant route.